Transpacific (North Pacific)
No canal or Red Sea passage, but a North Pacific crossing where winter storms have collapsed container stacks.
North America · sea freight from Shenzhen
Shipping from Shenzhen to Everett
Shenzhen to Everett
South China Sea · Taiwan Strait · East China Sea · Strait of Juan de Fuca
- ShenzhenChina origin
- South China Sea
- Taiwan Strait
- East China Sea
- Strait of Juan de Fuca
- EverettUnited States
This route runs from factories around the Pearl River Delta through Yantian or Shekou, then follows a great-circle crossing of the North Pacific; at the far end is the port of Everett.
Everett means US customs filings that are due while the container is still in Shenzhen, and a supply chain CBP may ask to see. The 5 points below are particular to this lane; each comes with what we do and the paperwork it touches.
What we need to start
- Yantian / Shekou export
- Typhoon season Jun–Oct
- Supply-chain tracing file
- HTS code 8507.60
- ISF filer
Route profile
What sets Shenzhen → Everett apart
United States
A duty line set by the exact 8507.60 code, lithium supply-chain questions under UFLPA, and ISF and AMS filings that are due before the box is loaded.
Where this route gets difficult
Where Shenzhen → Everett shipments get held up: 5 points
Loading port first, then the sea leg, then Everett and the United States market.
- Origin port
Factory stuffing in Dongguan, loading at Yantian: avoid a second opening
Much Shenzhen battery export is stuffed inland and trucked to the terminal. In May 2026 Yantian MSA and Dongguan MSA ran a cross-regional 'one-box' pilot: four battery containers were inspected jointly at the Dongguan factory and loaded at Yantian without being opened again. It shows that the inspection record made at the factory is what matters at the terminal.
What Anxin does: We ask at booking whether your factory and the terminal's MSA office can use the one-box arrangement, and we have stuffing photos, the packing certificate and the DG declaration match exactly, so the container is not held for re-inspection.
- Sea corridor
Winter storms with hurricane-force winds
NOAA's Ocean Prediction Center found hurricane-force winds (64 knots and above) in North Pacific mid-latitude storms in every month from October to April, peaking in December, with 15 to 23 such storms per season in its 2001–2004 records. They are not typhoons, so they do not follow the tropical calendar.
What Anxin does: For October–April sailings we check blocking and bracing on stuffing photos before sealing and confirm the full DG data are on the manifest.
- Import country
Day 15 at the terminal: the General Order deadline
US customs rules give an unentered container 15 calendar days at the place of unlading. After that the carrier hands it to a bonded general order warehouse, with transport and storage at the consignee's risk and expense, and for DG cargo that needs specialized storage the port director decides where it is kept (19 CFR 4.37).
What Anxin does: We check with the importer's broker that the entry can be filed before arrival at Everett, and chase any missing invoice or HTS detail while the ship is still at sea.
- Import country
Selling in Washington from 2027 means joining a stewardship plan
Washington's battery law (RCW 70A.555) closes the market to producers outside an approved stewardship organization from 1 January 2027, and from July 2027 retailers need the producer's certification before selling portable batteries or products that contain them.
What Anxin does: When cargo through Everett is sold in Washington, we flag the 2027 stewardship requirement to the importer at quotation so that retailer certification is in place in time.
- Import country
'China' has to be marked on each article or its container
19 CFR 134.11 requires every imported article, or its container, to carry the English name of the country of origin in a conspicuous place, as legibly, indelibly and permanently as the article allows, at the time it is imported. Batteries and battery products reaching Everett without it can be held until they are marked.
What Anxin does: We check product and carton photos for a durable 'Made in China' marking before stuffing in Shenzhen, rather than leaving it for re-marking in a US warehouse.
Documents & compliance
Documents to line up for Shenzhen → Everett
Anxin reviews documents supplied by the shipper, manufacturer and importer; it does not issue test reports, safety data sheets or import certificates.
In Shenzhen, before the box is loaded
- Confirmation from the carrier of the DG cut-off at Yantian or Shekou, rechecked in typhoon weeks
- Load plan showing even weight distribution (no more than 60% of the cargo weight in either half of the container length)
- 'Made in China' marking on articles or containers checked on photos
- Safety data sheet and dangerous goods safe-carriage declaration for the MSA cargo report
- Customs packaging use-appraisal result for the dangerous goods packaging (with the maker's performance appraisal)
For the carrier and the voyage
- Stuffing photos before, during and after packing, checked for blocking and bracing
- SP188 cartons: US 'forbidden aboard passenger aircraft' marking or CAO label
- UN 38.3 test summary for every cell and battery type
At the United States end
- 24-hour emergency response number (and provider reference) for the US road leg
- Importer of record and the licensed customs broker who will file the entry
Before you book
Send the file once, complete
Most delays on this route start with a document that exists but does not match: a UN number, a model name or a package count that differs between the Shenzhen filings, the carrier booking and the United States import file. We check the three against each other before the booking is confirmed.
Carriers we book with
Our booking panel; availability on this lane and acceptance of the declared UN numbers are confirmed for each booking. It does not mean that a listed carrier runs a direct service on this route. Carrier choice depends on the trade lane, cargo classification and each carrier's dangerous-goods acceptance at booking. The final carrier is confirmed on the booking.
Risk & mitigation
Risks on this route and who deals with them
| Risk | Where | Mitigation | Who acts |
|---|---|---|---|
| Container reopened at the terminal because records do not match | Factory → Yantian | Photos, packing certificate and DG declaration cross-checked before trucking | Anxin |
| Heavy-weather damage in a winter storm | North Pacific, Oct–Apr | CINS stuffing checks | Packing site, checked by Anxin |
Questions
Questions about shipping from Shenzhen to Everett
No. The carrier must also send its cargo declaration through AMS 24 hours before loading, and CBP will not issue the permit to unlade without it.
Weather is the main risk on this crossing: NOAA recorded hurricane-force North Pacific storms from October to April, most often in December. We tighten the packing checks for those sailings.
Yes, provided a certified packing inspector supervises the stuffing and signs the container packing certificate. Since May 2026 Yantian and Dongguan MSA have also piloted joint factory inspection so the container can be loaded at Yantian without reopening; we check whether your shipment can use it.
References
Regulations and port sources cited
- 19 CFR 134.11: Country of origin marking required (Legal Information Institute (e-CFR text))
- 19 CFR 4.7: inward foreign manifest; advance filing of cargo declaration (24 hours before lading) (Legal Information Institute (e-CFR text))
- 49 CFR 171.25 – Additional requirements for the use of the IMDG Code (eCFR / PHMSA)
- 49 CFR 172.604: Emergency response telephone number (eCFR / PHMSA)
- Hurricane force extratropical cyclones observed using QuikSCAT (Mariners Weather Log 49-1) (NOAA Ocean Prediction Center)
- Yantian MSA runs 'one-box' model for lithium battery sea exports (Chinese), 8 May 2026 (Shenzhen Development and Reform Commission (source: Shenzhen MSA))
- Forecasting yearly number of tropical cyclones affecting Hong Kong (tropical cyclone season June–October, most active July–September) (Hong Kong Observatory)
- Export dangerous goods packaging inspection: service guide (Chinese) (General Administration of Customs of China (Lanzhou Customs service guide))
Next step
From enquiry to import
- 1EnquiryCargo, origin, destination
- 2Documents checkUN 38.3, SDS, packing
- 3BookingAfter carrier acceptance
- 4HandoverAt Shenzhen
- 5ImportClearance at Everett
Prefer chat? Chat on WhatsApp (+86 151 4514 5178)
After you send it
We check carrier acceptance for Shenzhen → Everett before any booking, and ask for missing battery documents first.
All destinations from Shenzhen · United States ports
Need Shenzhen → Everett reviewed?
Share the cargo facts; we review the route in writing.
Request a Quote