Lithium battery freight focus Air · Sea · Land assessment Document-first planning
Shipment Status & Support

Europe · sea freight from Shenzhen

Shipping from Shenzhen to Nantes

Shenzhen to Nantes

South China Sea · Malacca Strait · Indian Ocean · Bab-el-Mandeb · Suez Canal · Sicily Channel · Strait of Gibraltar · Bay of Biscay

Sea corridor illustration: Shenzhen to Nantes, France Simplified map with a curved corridor from Shenzhen via South China Sea, Malacca Strait, Indian Ocean, Bab-el-Mandeb, Suez Canal, Sicily Channel, Strait of Gibraltar, Bay of Biscay to Nantes. Illustration only; not a vessel track or schedule. CHINAINDIAAFRICAEUROPECENTRAL ASIA Singapore / MalaccaSouth of Sri LankaBab-el-MandebSuez CanalGibraltar ShenzhenCHINA ORIGIN NantesFRANCE ShenzhenSOUTH CHINA SEAGUANGDONGDEPARTURE AREA
  1. ShenzhenChina origin
  2. South China Sea
  3. Malacca Strait
  4. Indian Ocean
  5. Bab-el-Mandeb
  6. Suez Canal
  7. Sicily Channel
  8. Strait of Gibraltar
  9. Bay of Biscay
  10. NantesFrance
Geographic corridor illustration only, not a vessel track, port-call list or sailing schedule. The loading terminal, carrier, transshipment and dates are confirmed per shipment.

From Shenzhen to Nantes, cargo moves out of Shenzhen's Yantian and Shekou terminals, crosses a Suez corridor that Mediterranean services are using again more than any other Asia–Europe lane, and is discharged at the port of Nantes.

The French side checks the producer's unique identifier (IDU) as well as the EU battery rules. This page sets out 5 points specific to this route, how Anxin handles each one and which documents to prepare.

What we need to start

  • Yantian / Shekou export
  • Typhoon season Jun–Oct
  • IDU (batteries stream)
  • French-language safety information
  • Consignee EORI

Route profile

The Shenzhen → Nantes route in brief

Sea corridor

Asia – Mediterranean via Suez

Mediterranean services are the ones most likely to use Suez again (57% in September 2026), which puts the cargo back through Bab el-Mandeb, rated a SUBSTANTIAL threat.

Import country

France

A SYDEREP IDU and eco-organisme membership for every battery category, with EU duties from CE marking to the importer's address on the battery.

Yantian port area in Shenzhen seen from the hills, with container berths along the bay
A loaded container ship on the horizon

Where this route gets difficult

5 points to plan for on the Shenzhen → Nantes route

Listed from loading in Shenzhen to import into France, each with what we do about it.

  1. Origin port

    Inspected in Dongguan, loaded unopened at Yantian

    A large share of Shenzhen's battery exports is stuffed inland and trucked to the quay. In a May 2026 cross-regional 'one-box' pilot, Yantian MSA and Dongguan MSA jointly inspected four battery containers at a Dongguan factory and loaded them at Yantian without reopening them, which shows that the factory inspection record is what counts at the terminal.

    What Anxin does: We ask at booking whether your factory and the terminal's MSA office can use the one-box arrangement, and we have stuffing photos, the packing certificate and the DG declaration match exactly, so the container is not held for re-inspection.

  2. Sea corridor

    The canal is open; the risk sits further south

    The JMIC's September 2026 update put the northern Red Sea and the Suez Canal at MODERATE, with two-way transits and container lines selectively returning, and the Eastern Mediterranean at LOW. On this corridor the exposure lies at the southern entrance of the Red Sea, not at the canal itself.

    What Anxin does: We check before each booking whether the service has changed routing since the last quote.

  3. Import country

    CE marking and a declaration of conformity in the right language

    Since 18 August 2024 a battery sold in the EU needs the CE marking and an EU declaration of conformity from its manufacturer. The declaration has to be available in the language France requires, and the importer is the one who must check both before the goods are released for sale.

    What Anxin does: We ask the manufacturer in China for the declaration of conformity and a photo of the CE marking on the battery or its packaging before loading, and pass them to the France importer. We check that the documents exist and match the goods; we do not assess conformity.

  4. Import country

    Battery label from August 2026, QR code from February 2027

    The Battery Regulation's general information label applies from 18 August 2026 (or 18 months after the label implementing act, if later), and every battery needs a QR code from 18 February 2027, linked to a battery passport for EV, LMT and industrial batteries above 2 kWh. Where the battery is too small, both go on the packaging and accompanying documents.

    What Anxin does: Before booking we ask the France importer to confirm the battery category and whether the label and QR-code elements are already on the goods, and compare carton photos with that answer.

  5. Import country

    User-replaceable batteries in appliances from 18 February 2027

    Article 11 of the Battery Regulation says that from 18 February 2027 portable batteries inside appliances must be readily removable and replaceable by the end-user using commercially available tools, without heat or solvents, except under limited derogations. Appliances sold in France after that date need a design that complies.

    What Anxin does: When appliances with built-in batteries are booked for France we point the importer to the February 2027 date so the manufacturer answers the design question before shipment; we do not assess compliance.

Locator map of Nantes, FranceNantes
Locator map in the same projection as the corridor map; the dot marks the listed port position (47.20°N, 1.57°W).
Container gantry cranes at the Burchardkai terminal in Hamburg

Documents & compliance

What to have ready: Shenzhen to Nantes

Test reports, safety data sheets and import certificates come from the shipper, factory and importer, not from Anxin; our part is to review them before booking.

In Shenzhen, before the box is loaded

  • Confirmation from the carrier of the DG cut-off at Yantian or Shekou, rechecked in typhoon weeks
  • Load plan showing even weight distribution (no more than 60% of the cargo weight in either half of the container length)
  • EU declaration of conformity and CE marking photo from the manufacturer
  • Importer name, trade name and postal address printed on battery or packaging
  • Annex V safety documentation confirmed for stationary storage systems

Carrier and voyage

  • Routing (Red Sea or Cape) and any war-risk surcharge stated on the booking
  • UN 38.3 test summary for every cell and battery type
  • Dangerous goods declaration with UN number (3480 / 3481 / 3090 / 3091), proper shipping name and packing instruction (P903, or P908/P911 for damaged)

For import into France

  • Label and QR-code status against the August 2026 and February 2027 dates
  • Instructions and safety information in the language France requires
  • Haulier in France briefed with UN number, class 9 and tunnel code (E) for the road leg
Two power-tool battery packs side by side
Before you book

One consistent file

A document that is present but inconsistent holds a booking as surely as a missing one: the UN number, model name or carton count reads differently in the Shenzhen export filings, the carrier booking and the France import papers. We compare all three before confirming space.

Carriers we book with

Our booking panel; availability on this lane and acceptance of the declared UN numbers are confirmed for each booking. It does not mean that a listed carrier runs a direct service on this route. Carrier choice depends on the trade lane, cargo classification and each carrier's dangerous-goods acceptance at booking. The final carrier is confirmed on the booking.

Risk & mitigation

Risks on this route and who deals with them

RiskWhereMitigationWho acts
Container reopened at the terminal because records do not matchFactory → YantianPhotos, packing certificate and DG declaration cross-checked before truckingAnxin
Declaration of conformity missing or not in the required languageImporter in FranceDeclaration and CE photo collected before loadingManufacturer / importer
Stock shipped without the label due from August 2026Importer in FranceLabel status confirmed before bookingManufacturer / importer

Questions

Questions about shipping from Shenzhen to Nantes

The CE marking on the battery and the manufacturer's EU declaration of conformity, which must be available in the language France requires. Both have applied since 18 August 2024.

Often: in September 2026, 57% of Asia–Mediterranean services used the Red Sea routing. Bab el-Mandeb was rated a SUBSTANTIAL threat by the JMIC on 24 September 2026, so we confirm each service's routing before booking.

Yes, provided a certified packing inspector supervises the stuffing and signs the container packing certificate. Since May 2026 Yantian and Dongguan MSA have also piloted joint factory inspection so the container can be loaded at Yantian without reopening; we check whether your shipment can use it.

Next step

From enquiry to import

  1. 1EnquiryCargo, origin, destination
  2. 2Documents checkUN 38.3, SDS, packing
  3. 3BookingAfter carrier acceptance
  4. 4HandoverAt Shenzhen
  5. 5ImportClearance at Nantes
Each step is confirmed in writing; an enquiry does not create a booking.

Ask about Shenzhen → Nantes

Origin and destination are filled in; add the cargo facts you have.

Sending this form starts a review; it does not confirm carriage. Full enquiry form

After you send it

We check carrier acceptance for Shenzhen → Nantes before any booking, and ask for missing battery documents first.

All destinations from Shenzhen · France ports

A forklift moving palletised cartons in a warehouse

Need Shenzhen → Nantes reviewed?

Share the cargo facts; we review the route in writing.

Request a Quote
Request a Quote WhatsApp