Lithium battery freight focus Air · Sea · Land assessment Document-first planning
Shipment Status & Support

Europe · sea freight from Shenzhen

Shipping from Shenzhen to Raahe

Shenzhen to Raahe

South China Sea · Malacca Strait · Indian Ocean · Bab-el-Mandeb · Suez Canal · Strait of Gibraltar · English Channel · Danish Straits

Sea corridor illustration: Shenzhen to Raahe, Finland Simplified map with a curved corridor from Shenzhen via South China Sea, Malacca Strait, Indian Ocean, Bab-el-Mandeb, Suez Canal, Strait of Gibraltar, English Channel, Danish Straits to Raahe. Illustration only; not a vessel track or schedule. CHINAINDIAAFRICAEUROPERUSSIAINDIAN OCEANNORTH ATLANTICNORTH PACIFICPACIFIC OCEAN Singapore / MalaccaBab-el-MandebSuez CanalGibraltarDanish Straits ShenzhenCHINA ORIGIN RaaheFINLAND ShenzhenSOUTH CHINA SEAGUANGDONGDEPARTURE AREA
  1. ShenzhenChina origin
  2. South China Sea
  3. Malacca Strait
  4. Indian Ocean
  5. Bab-el-Mandeb
  6. Suez Canal
  7. Strait of Gibraltar
  8. English Channel
  9. Danish Straits
  10. RaaheFinland
Geographic corridor illustration only, not a vessel track, port-call list or sailing schedule. The loading terminal, carrier, transshipment and dates are confirmed per shipment.

From Shenzhen to Raahe, cargo moves from Dongguan and Shenzhen factories via Yantian, crosses a long Europe voyage extended through the Danish straits into the Baltic, and is discharged at the port of Raahe.

The Finnish side adds producer registration to the EU battery rules. This page sets out 5 points specific to this route, how Anxin handles each one and which documents to prepare.

What we need to start

  • Typhoon season Jun–Oct
  • Yantian / Shekou export
  • Consignee EORI
  • EU declaration of conformity
  • Finnish producer register entry
Ask about this route Finland ports from Shenzhen

Route profile

What sets Shenzhen → Raahe apart

Sea corridor

Asia – Baltic via the Danish straits

The Baltic is reached only through the Danish straits, where deep-draught ships are advised to take pilots, and its northern ports set ice-class restrictions every winter.

Import country

Finland

The national producer register at the Finnish Supervisory Agency, a Finnish authorised representative for distance sellers, and the EU-wide battery and ICS2 duties.

Yantian port area in Shenzhen seen from the hills, with container berths along the bay
A cargo ship at anchor in calm water under a clear sky

Where this route gets difficult

5 points to plan for on the Shenzhen → Raahe route

They run from the Shenzhen terminal through the voyage to Raahe and the Finland import file.

  1. Origin port

    Cut-offs in Shenzhen's typhoon weeks

    June to October is the regional tropical cyclone season according to the Hong Kong Observatory, peaking July to September. Because DG boxes need approved MSA filings and a signed packing certificate before loading, a gate closure or rolled vessel in those weeks can move the entire document chain to another sailing.

    What Anxin does: From June to October we build slack into the stuffing date, confirm the DG cut-off with the carrier the week before loading, and resubmit filings promptly if the vessel changes.

  2. Sea corridor

    The inbound leg's emissions now count under EU ETS

    Because Raahe is an EU port, container ships of 5,000 GT or more calling there fall under the EU Emissions Trading System, which covers half the emissions of the voyage from China. Lines surrendered allowances for 70% of those emissions in 2025 and must cover 100% from 2027, a cost that can reach shippers as a surcharge.

    What Anxin does: We ask for the emissions surcharge to be shown as its own line in the quote, with the basis the carrier uses, so that successive quotes can be compared like for like.

  3. Import country

    Safety documentation for stationary storage systems

    Since 18 August 2024 a stationary battery energy storage system placed on the EU market must be safe in normal operation, and its technical documentation must show testing against the Annex V safety parameters, from thermal shock and short-circuit protection to over-discharge and thermal propagation. Buyers of ESS cabinets in Finland increasingly ask for that file before delivery.

    What Anxin does: For ESS cabinets and racks bound for Finland we ask the manufacturer to confirm that the Annex V test documentation exists before booking and note the answer in the shipment file.

  4. Import country

    The ICS2 entry summary is due before loading in Shenzhen

    Sea cargo for the EU needs a complete Entry Summary Declaration under ICS2 Release 3, and for deep-sea containers it is due 24 hours before loading at the departure port. Carriers apply 'no manifest, no load', and a filing without a valid EORI number is rejected, so a data gap in Shenzhen leaves the box on the quay.

    What Anxin does: We collect the consignee's EORI number, an HS-level goods description and the house-bill parties at booking, and make sure the party filing the ENS has them before the Shenzhen cut-off.

  5. Import country

    Substance limits for portable batteries

    For portable batteries, Annex I sets maximum levels of 0.0005 % mercury, 0.002 % cadmium and 0.01 % lead by weight, the lead limit applying since 18 August 2024. The importer in Finland may be asked by market surveillance to demonstrate compliance.

    What Anxin does: We ask the manufacturer for its substance declaration or test report reference and file it with the shipping documents for the Finland importer; we do not test batteries.

Locator map of Raahe, FinlandRaahe
Locator map in the same projection as the corridor map; the dot marks the listed port position (64.68°N, 24.42°E).
Close view of stacked blue and red shipping containers at the Port of Rotterdam

Documents & compliance

Documents to line up for Shenzhen → Raahe

Test reports, safety data sheets and import certificates come from the shipper, factory and importer, not from Anxin; our part is to review them before booking.

Before loading in Shenzhen

  • Confirmation from the carrier of the DG cut-off at Yantian or Shekou, rechecked in typhoon weeks
  • Customs packaging use-appraisal result for the dangerous goods packaging (with the maker's performance appraisal)
  • Container packing certificate signed by a certified packing inspector after supervised stuffing
  • Transport-condition classification report where applicable
  • Load plan showing even weight distribution (no more than 60% of the cargo weight in either half of the container length)

For the shipping line

  • Transhipment port, feeder operator and feeder DG acceptance named on the booking
  • Dangerous goods declaration with UN number (3480 / 3481 / 3090 / 3091), proper shipping name and packing instruction (P903, or P908/P911 for damaged)
  • Lithium battery mark (SP188 cargo) or class 9 labels and placards

For the importer in Finland

  • Finnish producer register entry (or authorised representative)
  • Label and QR-code status against the August 2026 and February 2027 dates
Two power-tool battery packs side by side
Before you book

Match the details first

We line up UN numbers, model names and package counts across the Shenzhen filings, the booking with the carrier and the documents for Finland before the booking is confirmed, so that a mismatch is fixed at origin rather than discovered at Raahe.

Carriers we book with

Our booking panel; availability on this lane and acceptance of the declared UN numbers are confirmed for each booking. It does not mean that a listed carrier runs a direct service on this route. Carrier choice depends on the trade lane, cargo classification and each carrier's dangerous-goods acceptance at booking. The final carrier is confirmed on the booking.

Risk & mitigation

Risk table for Shenzhen → Raahe

RiskWhereMitigationWho acts
Typhoon closes terminals or delays the vessel after filings are madeYantian / Shekou, Jun–OctSlack in stuffing date; refile quickly on vessel changeAnxin with the declarant
Emissions surcharge changes between quote and sailingEU port callSurcharge shown as a separate lineCarrier, checked by Anxin
ENS not filed and the box is refused at loadingLoading port, ShenzhenEORI and house-bill data passed to the filer at bookingFiler (carrier / forwarder)
Storage system delivered without Annex V test fileBuyer in FinlandTest documentation confirmed before bookingManufacturer

Questions

Common questions on the Shenzhen → Raahe route

An authorised representative established in Finland, which can be a producer organisation, registers and reports on the seller's behalf in the national producer register.

Often, but it depends on the service. The Baltic is reached through the Danish straits, and we ask the carrier to name any transhipment port and confirm DG acceptance for each vessel.

Yes, provided a certified packing inspector supervises the stuffing and signs the container packing certificate. Since May 2026 Yantian and Dongguan MSA have also piloted joint factory inspection so the container can be loaded at Yantian without reopening; we check whether your shipment can use it.

References

Where these points come from

  1. How does a distance seller manage their extended producer responsibility? (Finnish Supervisory Agency (Lupa- ja valvontavirasto))
  2. ICS2 Release 3: Prepare your business for sending goods to or via the EU by sea and inland waterways (European Commission, DG TAXUD (leaflet KP0423828ENN))
  3. Navigation through Danish waters (version 16.0, 2025) (Danish Maritime Authority)
  4. Reducing emissions from the shipping sector (European Commission (DG Climate Action))
  5. Yantian MSA runs 'one-box' model for lithium battery sea exports (Chinese), 8 May 2026 (Shenzhen Development and Reform Commission (source: Shenzhen MSA))
  6. Forecasting yearly number of tropical cyclones affecting Hong Kong (tropical cyclone season June–October, most active July–September) (Hong Kong Observatory)
  7. Export dangerous goods packaging inspection: service guide (Chinese) (General Administration of Customs of China (Lanzhou Customs service guide))

Next step

From enquiry to import

  1. 1EnquiryCargo, origin, destination
  2. 2Documents checkUN 38.3, SDS, packing
  3. 3BookingAfter carrier acceptance
  4. 4HandoverAt Shenzhen
  5. 5ImportClearance at Raahe
Each step is confirmed in writing; an enquiry does not create a booking.

Ask about Shenzhen → Raahe

Origin and destination are filled in; add the cargo facts you have.

Sending this form starts a review; it does not confirm carriage. Full enquiry form

After you send it

We check carrier acceptance for Shenzhen → Raahe before any booking, and ask for missing battery documents first.

All destinations from Shenzhen · Finland ports

Workers loading cartons from pallets by hand in a warehouse

Need Shenzhen → Raahe reviewed?

Share the cargo facts; we review the route in writing.

Request a Quote
Request a Quote WhatsApp