Shenzhen (Yantian / Shekou)
Pearl River Delta battery cargo, often stuffed at factories in Dongguan or Huizhou, exported through Yantian or Shekou, with a typhoon season from June to October.
Europe · sea freight from Shenzhen
Shipping from Shenzhen to Kemi
Shenzhen to Kemi
South China Sea · Malacca Strait · Indian Ocean · Bab-el-Mandeb · Suez Canal · Strait of Gibraltar · English Channel · Danish Straits
- ShenzhenChina origin
- South China Sea
- Malacca Strait
- Indian Ocean
- Bab-el-Mandeb
- Suez Canal
- Strait of Gibraltar
- English Channel
- Danish Straits
- KemiFinland
From Shenzhen to Kemi, cargo moves from factories around the Pearl River Delta through Yantian or Shekou, crosses a Suez-or-Cape voyage that ends with the Danish straits and the Baltic, and is discharged at the port of Kemi.
The Finnish side adds producer registration to the EU battery rules. The 5 points below are particular to this lane; each comes with what we do and the paperwork it touches.
What we need to start
- Yantian / Shekou export
- Typhoon season Jun–Oct
- Finnish and Swedish safety information
- Consignee EORI
- EU declaration of conformity
Route profile
The Shenzhen → Kemi route in brief
Asia – Baltic via the Danish straits
The Baltic is reached only through the Danish straits, where deep-draught ships are advised to take pilots, and its northern ports set ice-class restrictions every winter.
Where this route gets difficult
5 pain points from Shenzhen to Kemi
Loading port first, then the sea leg, then Kemi and the Finland market.
- Origin port
Dongguan's packaging certificate data is shared
Dongguan, home to more than 500 battery companies, supplies much of the cargo leaving Shenzhen. Since September 2026 Dongguan Customs and Dongguan MSA share dangerous-goods packaging certificate data, described as a first in China, and act jointly against concealed and false declarations; the one-box route to Yantian, 409 containers by then, relies on the same record.
What Anxin does: We compare the packaging certificate with the MSA cargo report (UN number, packaging code, number of packages) before either goes in, so the shared data shows no gap.
- Sea corridor
Suez or Cape before the Baltic even starts
Before the Danish straits, the voyage from Asia is the same as for North Europe: Sea-Intelligence data for September 2026 put Red Sea routing at 27% for North Europe services, so most boxes still go round the Cape of Good Hope, where SAMSA estimates about 35% of 2024's lost containers went overboard.
What Anxin does: We quote the Suez and Cape routings separately when both are offered and apply the CINS stuffing checks strictly on Cape sailings.
- Import country
The truck leg out of Kemi runs under ADR
Once the container leaves the terminal by road, ADR applies: Directive 2008/68/EC makes EU countries use it for domestic dangerous goods journeys as well as international ones. UN 3480 is class 9, transport category 2, with tunnel restriction code (E), so the haulier in Finland has to plan around category E tunnels, and damaged or defective batteries fall under special provision 376 and packing instructions P908 or P911 instead of P903.
What Anxin does: We give the Finland haulier the same UN number, class and package details that appear on the sea dangerous goods declaration, so the ADR transport document matches the container paperwork from Shenzhen.
- Import country
Instructions and safety information in the language of Finland
Importers must make sure batteries come with instructions and safety information in a language end-users in Finland easily understand, as that Member State decides. Printed inserts and carton text are far easier to change before the goods are packed in China.
What Anxin does: We ask the importer which language Finland requires and check carton and insert photos against it before loading.
- Import country
Mercury, cadmium and lead limits in portable batteries
Annex I of the Battery Regulation caps mercury at 0.0005 %, cadmium at 0.002 % and lead at 0.01 % by weight in portable batteries, and the lead limit has applied since 18 August 2024. Market surveillance in Finland can ask the importer to show that the goods meet these limits.
What Anxin does: We ask the manufacturer for its substance declaration or test report reference and file it with the shipping documents for the Finland importer; we do not test batteries.
Documents & compliance
Checklist for Shenzhen → Kemi
These documents come from the shipper, the manufacturer and the importer. Anxin checks them against each other; it does not issue test reports, safety data sheets or import certificates.
At the Shenzhen end
- Confirmation from the carrier of the DG cut-off at Yantian or Shekou, rechecked in typhoon weeks
- Container packing certificate signed by a certified packing inspector after supervised stuffing
- Transport-condition classification report where applicable
- Load plan showing even weight distribution (no more than 60% of the cargo weight in either half of the container length)
- EU declaration of conformity and CE marking photo from the manufacturer
For the carrier and the voyage
- Transhipment port, feeder operator and feeder DG acceptance named on the booking
- Lithium battery mark (SP188 cargo) or class 9 labels and placards
- Condition statement: new, used, damaged/defective (SP376) or for recycling (SP377)
For import into Finland
- Instructions and safety information in the language Finland requires
- Label and QR-code status against the August 2026 and February 2027 dates
- Finnish producer register entry (or authorised representative)
Before you book
One consistent file
A document that is present but inconsistent holds a booking as surely as a missing one: the UN number, model name or carton count reads differently in the Shenzhen export filings, the carrier booking and the Finland import papers. We compare all three before confirming space.
Carriers we book with
Our booking panel; availability on this lane and acceptance of the declared UN numbers are confirmed for each booking. It does not mean that a listed carrier runs a direct service on this route. Carrier choice depends on the trade lane, cargo classification and each carrier's dangerous-goods acceptance at booking. The final carrier is confirmed on the booking.
Risk & mitigation
What could go wrong from Shenzhen to Kemi, and who acts
| Risk | Where | Mitigation | Who acts |
|---|---|---|---|
| Packaging certificate and MSA filing disagree; shipment flagged | Dongguan → Yantian | Line-by-line comparison before filing | Anxin with the declarant |
| Road route planned through a category E tunnel | Road leg from Kemi | Tunnel code (E) passed to the haulier with the transport data | Haulier / forwarder |
Questions
Common questions on the Shenzhen → Kemi route
An authorised representative established in Finland, which can be a producer organisation, registers and reports on the seller's behalf in the national producer register.
Yes, but in the restriction period only ships of the required ice class and deadweight receive icebreaker assistance. Finland's agency publishes the restrictions on baltice.org, with exemption requests due at least three working days before arrival.
Since September 2026 Dongguan Customs and Dongguan MSA share dangerous-goods packaging certificate data and act jointly against false declarations, so the packaging certificate and the MSA filing should match exactly.
References
Regulations and port sources cited
- How does a distance seller manage their extended producer responsibility? (Finnish Supervisory Agency (Lupa- ja valvontavirasto))
- Regulation (EU) 2023/1542 on batteries and waste batteries (ELI) (EUR-Lex / Publications Office of the EU)
- Inland transport of dangerous goods (summary of Directive 2008/68/EC) (EUR-Lex)
- Navigation through Danish waters (version 16.0, 2025) (Danish Maritime Authority)
- Finland's winter navigation 2025–2026 (Finnish Transport Infrastructure Agency)
- Forecasting yearly number of tropical cyclones affecting Hong Kong (tropical cyclone season June–October, most active July–September) (Hong Kong Observatory)
- Export dangerous goods packaging inspection: service guide (Chinese) (General Administration of Customs of China (Lanzhou Customs service guide))
Next step
From enquiry to import
- 1EnquiryCargo, origin, destination
- 2Documents checkUN 38.3, SDS, packing
- 3BookingAfter carrier acceptance
- 4HandoverAt Shenzhen
- 5ImportClearance at Kemi
Prefer chat? Chat on WhatsApp (+86 151 4514 5178)
After you send it
We check carrier acceptance for Shenzhen → Kemi before any booking, and ask for missing battery documents first.
All destinations from Shenzhen · Finland ports
Need Shenzhen → Kemi reviewed?
Share the cargo facts; we review the route in writing.
Request a Quote