Lithium battery freight focus Air · Sea · Land assessment Document-first planning
Shipment Status & Support

North America · sea freight from Lianyungang

Shipping from Lianyungang to Tuktoyaktuk

Lianyungang to Tuktoyaktuk

Yellow Sea · Korea Strait · Sea of Japan · Tsugaru Strait · Bering Strait · Chukchi Sea · Beaufort Sea

Sea corridor illustration: Lianyungang to Tuktoyaktuk, Canada Simplified map with a curved corridor from Lianyungang via Yellow Sea, Korea Strait, Sea of Japan, Tsugaru Strait, Bering Strait, Chukchi Sea, Beaufort Sea to Tuktoyaktuk. Illustration only; not a vessel track or schedule. CHINASIBERIANORTH AMERICAALASKANORTH PACIFIC Tsugaru StraitBering Strait LianyungangCHINA ORIGIN TuktoyaktukCANADA LianyungangYELLOW SEASHANDONGJIANGSUDEPARTURE AREA
  1. LianyungangChina origin
  2. Yellow Sea
  3. Korea Strait
  4. Sea of Japan
  5. Tsugaru Strait
  6. Bering Strait
  7. Chukchi Sea
  8. Beaufort Sea
  9. TuktoyaktukCanada
Geographic corridor illustration only, not a vessel track, port-call list or sailing schedule. The loading terminal, carrier, transshipment and dates are confirmed per shipment.

This route runs out of Lianyungang, where the MSA simplified 'new three' filings in 2024, then follows a great-circle crossing of the North Pacific; at the far end is the port of Tuktoyaktuk.

Canadian clearance depends on eManifest data filed before loading and on the importer's CARM set-up. The 5 points below are particular to this lane; each comes with what we do and the paperwork it touches.

What we need to start

  • Lianyungang export
  • Break-bulk ESS guide
  • CARM account
  • Bilingual labels
  • eManifest cut-off

Route profile

The Lianyungang → Tuktoyaktuk route in brief

Sea corridor

Transpacific (North Pacific)

No canal or Red Sea passage, but a North Pacific crossing where winter storms have collapsed container stacks.

Import country

Canada

An eManifest filed 24 hours before loading, release-before-payment only with CARM security, and TDG conditions on the truck leg.

Aerial view over the Port of Lianyungang with berths, rail lines and cargo yards
A cargo ship at anchor in calm water under a clear sky

Where this route gets difficult

5 points to plan for on the Lianyungang → Tuktoyaktuk route

Loading port first, then the sea leg, then Tuktoyaktuk and the Canada market.

  1. Origin port

    Lianyungang's break-bulk guide for ESS

    For energy storage shipped on break-bulk vessels, Lianyungang MSA's June 2025 guide classes ESS cabinets as UN3480 and ESS containers as UN3536, recommends 20–50% remaining charge, and requires converters and monitoring switched off, series and parallel circuits disconnected, packages spread evenly with a low centre of gravity, and a safety meeting before the ship arrives.

    What Anxin does: For ESS units we confirm the UN number the unit ships under, get the state of charge and isolation steps in writing from the manufacturer, and join the pre-arrival safety meeting with the stowage details.

  2. Origin port

    Four cargo-side documents at Lianyungang, each checked

    Under Lianyungang MSA's Notice No. 1 of 2024 the cargo side of a 'new three' filing needs four items: safe-carriage declaration, packing certificate signed by an inspector, packaging inspection certificate where the goods are packaged, and a power of attorney. A shorter list puts more weight on each paper, and the packing certificate still requires a certified inspector after supervised stuffing.

    What Anxin does: We prepare the four cargo-side documents together and check that the packing certificate, the packaging certificate and the declaration describe the same UN numbers and quantities.

  3. Sea corridor

    An open-ocean crossing where weather is the main risk

    From Lianyungang the drawn corridor to Tuktoyaktuk runs across the North Pacific without a canal or Red Sea passage, so weather replaces chokepoints as the risk. The ONE Apus, bound from Yantian to Long Beach in November 2020, had a stack collapse in a storm about 1,600 nautical miles north-west of Hawaii; her owners said more than 1,900 containers could be lost or damaged, up to 40 of them hazmat.

    What Anxin does: For winter sailings especially, we review blocking and bracing on stuffing photos against the CINS points before sealing, and make sure the DG declaration is complete, so a damaged box can be identified and handled correctly.

  4. Import country

    CARM: no posted security, no release before payment

    The CBSA's CARM transition ended in May 2025. Importer accounts with dutiable goods that had not posted financial security were removed from release prior to payment, and they now pay duties and taxes at release. An importer new to Tuktoyaktuk has to settle this before the first container lands.

    What Anxin does: At quotation we ask the Canada importer whether its CARM account has security posted for release prior to payment, so the broker's release plan is known before the ship arrives.

  5. Import country

    eManifest: cargo data 24 hours before loading in Lianyungang

    The CBSA requires marine carriers to transmit cargo and conveyance data for containers at least 24 hours before loading at the foreign port, including the estimated loading time. If the data are amended electronically before departure, the 24-hour count starts again from the CBSA's acknowledgement, so a late correction can push a box for Tuktoyaktuk off its vessel.

    What Anxin does: We send the carrier the final cargo description, UN number, weights and consignee details before the cut-off in Lianyungang and avoid amendments after the filing.

Locator map of Tuktoyaktuk, CanadaTuktoyaktuk
Locator map in the same projection as the corridor map; the dot marks the listed port position (69.44°N, 133.03°W).
Container ship being unloaded under red gantry cranes in Vancouver

Documents & compliance

Documents to line up for Lianyungang → Tuktoyaktuk

Test reports, safety data sheets and import certificates come from the shipper, factory and importer, not from Anxin; our part is to review them before booking.

In Lianyungang, before the box is loaded

  • The four cargo-side documents under Lianyungang MSA Notice 2024 No. 1 prepared together and cross-checked
  • For ESS: UN3480 or UN3536 confirmed, state of charge and circuit isolation stated in writing
  • Transport-condition classification report where applicable
  • Load plan showing even weight distribution (no more than 60% of the cargo weight in either half of the container length)
  • Bilingual (English/French) retail labelling checked on artwork

Carrier and voyage

  • Stuffing photos before, during and after packing, checked for blocking and bracing
  • Condition statement: new, used, damaged/defective (SP376) or for recycling (SP377)
  • Final cargo data with the carrier before the eManifest cut-off; no amendments after filing

For the importer in Canada

  • Importer's CARM account and release-prior-to-payment security confirmed
  • English DG documents with a 24-hour number for the Canadian road leg
Warehouse with red racking and pallets of boxes
Before you book

One consistent file

A document that is present but inconsistent holds a booking as surely as a missing one: the UN number, model name or carton count reads differently in the Lianyungang export filings, the carrier booking and the Canada import papers. We compare all three before confirming space.

Carriers we book with

Our booking panel; availability on this lane and acceptance of the declared UN numbers are confirmed for each booking. It does not mean that a listed carrier runs a direct service on this route. Carrier choice depends on the trade lane, cargo classification and each carrier's dangerous-goods acceptance at booking. The final carrier is confirmed on the booking.

Risk & mitigation

Risk table for Lianyungang → Tuktoyaktuk

RiskWhereMitigationWho acts
ESS unit not isolated or poorly distributed in a break-bulk holdLianyungang, break-bulk loadingManufacturer's written isolation steps; safety meetingManufacturer / ship, coordinated by Anxin
One of the four documents inconsistent with the othersLianyungang MSA filingCross-check before submissionAnxin with the declarant
Stack collapse or cargo shift in a North Pacific stormMid-PacificBlocking and bracing checked before sealing; complete DG data for incident responsePacking site / carrier, checked by Anxin
Container rolled after a late eManifest amendmentLoading portData final before filingCarrier, with data from Anxin
Goods held at release until duties and taxes are paidCanadian port of dischargeCARM security checked at quotationImporter / broker

Questions

Questions about shipping from Lianyungang to Tuktoyaktuk

At least 24 hours before loading in China. If the data are amended electronically before the ship sails, the 24 hours restart from the CBSA's acknowledgement.

Weather is the main risk on this crossing: NOAA recorded hurricane-force North Pacific storms from October to April, most often in December. We tighten the packing checks for those sailings.

Its June 2025 break-bulk ESS guide recommends 20–50% remaining charge, with converters and monitoring off and circuits disconnected.

Next step

From enquiry to import

  1. 1EnquiryCargo, origin, destination
  2. 2Documents checkUN 38.3, SDS, packing
  3. 3BookingAfter carrier acceptance
  4. 4HandoverAt Lianyungang
  5. 5ImportClearance at Tuktoyaktuk
Each step is confirmed in writing; an enquiry does not create a booking.

Ask about Lianyungang → Tuktoyaktuk

Origin and destination are filled in; add the cargo facts you have.

Sending this form starts a review; it does not confirm carriage. Full enquiry form

After you send it

We check carrier acceptance for Lianyungang → Tuktoyaktuk before any booking, and ask for missing battery documents first.

All destinations from Lianyungang · Canada ports

Trailers backed up to the loading docks of a warehouse

Need Lianyungang → Tuktoyaktuk reviewed?

Share the cargo facts; we review the route in writing.

Request a Quote
Request a Quote WhatsApp