Lithium battery freight focus Air · Sea · Land assessment Document-first planning
Shipment Status & Support

Europe · sea freight from Guangzhou

Shipping from Guangzhou to Kemi

Guangzhou to Kemi

South China Sea · Malacca Strait · Indian Ocean · Bab-el-Mandeb · Suez Canal · Strait of Gibraltar · English Channel · Danish Straits

Sea corridor illustration: Guangzhou to Kemi, Finland Simplified map with a curved corridor from Guangzhou via South China Sea, Malacca Strait, Indian Ocean, Bab-el-Mandeb, Suez Canal, Strait of Gibraltar, English Channel, Danish Straits to Kemi. Illustration only; not a vessel track or schedule. CHINAINDIAAFRICAEUROPERUSSIANORTH ATLANTICNORTH PACIFICPACIFIC OCEAN Singapore / MalaccaBab-el-MandebSuez CanalGibraltarDanish Straits GuangzhouCHINA ORIGIN KemiFINLAND GuangzhouSOUTH CHINA SEAGUANGDONGDEPARTURE AREA
  1. GuangzhouChina origin
  2. South China Sea
  3. Malacca Strait
  4. Indian Ocean
  5. Bab-el-Mandeb
  6. Suez Canal
  7. Strait of Gibraltar
  8. English Channel
  9. Danish Straits
  10. KemiFinland
Geographic corridor illustration only, not a vessel track, port-call list or sailing schedule. The loading terminal, carrier, transshipment and dates are confirmed per shipment.

From Guangzhou to Kemi, cargo moves through Guangzhou's Nansha terminals, which since September 2026 accept Dongguan-inspected battery boxes without a second check, crosses a long Europe voyage extended through the Danish straits into the Baltic, and is discharged at the port of Kemi.

Finland keeps its battery producers in a national register at the Finnish Supervisory Agency. This page sets out 5 points specific to this route, how Anxin handles each one and which documents to prepare.

What we need to start

  • Typhoon season Jun–Oct
  • Nansha export
  • Finnish producer register entry
  • Finnish and Swedish safety information
  • Consignee EORI

Route profile

How Guangzhou → Kemi differs from other lanes

Origin port

Guangzhou (Nansha)

Pearl River Delta battery cargo through Nansha, where a September 2026 agreement lets Dongguan-inspected containers load without a second MSA check, and where typhoon season runs June to October.

Sea corridor

Asia – Baltic via the Danish straits

The Baltic is reached only through the Danish straits, where deep-draught ships are advised to take pilots, and its northern ports set ice-class restrictions every winter.

Elevated section of the Nansha Port Railway on concrete piers in Guangzhou's Nansha district
A loaded container ship on the horizon

Where this route gets difficult

5 pain points from Guangzhou to Kemi

In the order the cargo meets them: at the loading port, at sea, at Kemi and at customs in Finland.

  1. Origin port

    One-box inspection now reaches Nansha

    Since 22 September 2026 Guangzhou MSA accepts Dongguan MSA's factory inspection for boxes loading at Nansha and re-inspects only when necessary. The first container was stuffed in Dongguan that day and left Nansha for Singapore on 24 September. Because the arrangement is new at Nansha, the factory record needs to be correct the first time.

    What Anxin does: We ask at booking whether your Dongguan factory can use the Nansha one-box arrangement and make sure the stuffing photos, packing certificate and DG declaration match, because a mismatch is the 'necessary' case that brings the second inspection back.

  2. Sea corridor

    The Asia leg decides Suez or the Cape

    Up to the Danish straits the voyage matches North Europe's: Sea-Intelligence put Red Sea routing at 27% for North Europe services in September 2026, so most containers still sail round the Cape of Good Hope, where SAMSA estimates about 35% of the containers lost in 2024 went overboard.

    What Anxin does: We quote the Suez and Cape routings separately when both are offered and apply the CINS stuffing checks strictly on Cape sailings.

  3. Import country

    Battery label from August 2026, QR code from February 2027

    The Battery Regulation's general information label applies from 18 August 2026 (or 18 months after the label implementing act, if later), and every battery needs a QR code from 18 February 2027, linked to a battery passport for EV, LMT and industrial batteries above 2 kWh. Where the battery is too small, both go on the packaging and accompanying documents.

    What Anxin does: Before booking we ask the Finland importer to confirm the battery category and whether the label and QR-code elements are already on the goods, and compare carton photos with that answer.

  4. Import country

    Safety documentation for stationary storage systems

    Since 18 August 2024 a stationary battery energy storage system placed on the EU market must be safe in normal operation, and its technical documentation must show testing against the Annex V safety parameters, from thermal shock and short-circuit protection to over-discharge and thermal propagation. Buyers of ESS cabinets in Finland increasingly ask for that file before delivery.

    What Anxin does: For ESS cabinets and racks bound for Finland we ask the manufacturer to confirm that the Annex V test documentation exists before booking and note the answer in the shipment file.

  5. Import country

    Built-in portable batteries must be user-replaceable from February 2027

    From 18 February 2027, Article 11 requires portable batteries built into appliances to be readily removable and replaceable by the end-user with commercially available tools, without heat or solvents, apart from limited derogations. Appliances shipped to Finland for sale after that date need a design that meets the rule.

    What Anxin does: When appliances with built-in batteries are booked for Finland we point the importer to the February 2027 date so the manufacturer answers the design question before shipment; we do not assess compliance.

Locator map of Kemi, FinlandKemi
Locator map in the same projection as the corridor map; the dot marks the listed port position (65.73°N, 24.57°E).
Close view of stacked blue and red shipping containers at the Port of Rotterdam

Documents & compliance

Checklist for Guangzhou → Kemi

Anxin reviews documents supplied by the shipper, manufacturer and importer; it does not issue test reports, safety data sheets or import certificates.

At the Guangzhou end

  • Container packing certificate signed by a certified packing inspector after supervised stuffing
  • Transport-condition classification report where applicable
  • Load plan showing even weight distribution (no more than 60% of the cargo weight in either half of the container length)
  • EU declaration of conformity and CE marking photo from the manufacturer
  • Importer name, trade name and postal address printed on battery or packaging

For the shipping line

  • Transhipment port, feeder operator and feeder DG acceptance named on the booking
  • Lithium battery mark (SP188 cargo) or class 9 labels and placards
  • Condition statement: new, used, damaged/defective (SP376) or for recycling (SP377)

For the importer in Finland

  • Label and QR-code status against the August 2026 and February 2027 dates
  • Haulier in Finland briefed with UN number, class 9 and tunnel code (E) for the road leg
  • Finnish producer register entry (or authorised representative)
Cartons on a pallet being stretch-wrapped
Before you book

Match the details first

We line up UN numbers, model names and package counts across the Guangzhou filings, the booking with the carrier and the documents for Finland before the booking is confirmed, so that a mismatch is fixed at origin rather than discovered at Kemi.

Carriers we book with

Our booking panel; availability on this lane and acceptance of the declared UN numbers are confirmed for each booking. It does not mean that a listed carrier runs a direct service on this route. Carrier choice depends on the trade lane, cargo classification and each carrier's dangerous-goods acceptance at booking. The final carrier is confirmed on the booking.

Risk & mitigation

What could go wrong from Guangzhou to Kemi, and who acts

RiskWhereMitigationWho acts
Second inspection at Nansha because factory records are incompleteDongguan factory → NanshaPhotos, packing certificate and declaration matched before truckingAnxin
Stock shipped without the label due from August 2026Importer in FinlandLabel status confirmed before bookingManufacturer / importer
Storage system delivered without Annex V test fileBuyer in FinlandTest documentation confirmed before bookingManufacturer

Questions

Common questions on the Guangzhou → Kemi route

An authorised representative established in Finland, which can be a producer organisation, registers and reports on the seller's behalf in the national producer register.

Often, but it depends on the service. The Baltic is reached through the Danish straits, and we ask the carrier to name any transhipment port and confirm DG acceptance for each vessel.

Both now have a one-box arrangement with Dongguan MSA: Yantian since May 2026 and Nansha since 22 September 2026, so a container inspected at the factory need not be reopened at the terminal unless necessary. The choice then comes down to the carrier's service to your destination and the cut-offs; we compare both when you book.

Next step

From enquiry to import

  1. 1EnquiryCargo, origin, destination
  2. 2Documents checkUN 38.3, SDS, packing
  3. 3BookingAfter carrier acceptance
  4. 4HandoverAt Guangzhou
  5. 5ImportClearance at Kemi
Each step is confirmed in writing; an enquiry does not create a booking.

Ask about Guangzhou → Kemi

Origin and destination are filled in; add the cargo facts you have.

Sending this form starts a review; it does not confirm carriage. Full enquiry form

After you send it

We check carrier acceptance for Guangzhou → Kemi before any booking, and ask for missing battery documents first.

All destinations from Guangzhou · Finland ports

A forklift moving palletised cartons in a warehouse

Need Guangzhou → Kemi reviewed?

Share the cargo facts; we review the route in writing.

Request a Quote
Request a Quote WhatsApp